Jean P,
I know you are interested in this as
you wanted Bulents email address.
Here is some stuff I have on it.
If you need more help let me know.
Tracy's box can be adapted to just about any stock light weight die cast
Mazda bell housing.
Paul Lamar
I'm curious about this as well. Is there a mechanical, or monetary advantage
to this, over Tracy cook design? Can you buy a partial Tracy cook unit that
costs less? I do have a transmission laying around.
C. Smith
The advantage is mostly cosmetic. I am not sure Tracy will give
you much off if any for his adapter plate and spacers.
Paul Lamar
HI paul
On the following photo #p1030242 i am wondering if this
housing will fit on the rx-8 engine , i will need a long
housing for my new design i will explain to you later
ans i will need your knowledge with my design as twin canard design
Jean Prudhomme
That is a stock 2nd gen manual transmission bell housing. Probably pretty
cheap in the junk yards. Especially if the gears are broken. You won't
be using the gears and most of the box will be empty space. No problem.
It will fit the RX8 engine with the exception of one 10 mm bolt at
the top. No problem.
You will need a custom extra long input shaft to mate with Tracy's
parts. Quite feasible but it just cost money to make as it will have
to be splined to fit the torsional vibration dampener.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.