Subject: Mufflers, possibly good news
From: Rotary Engine
Date: 8/4/2009, 8:07 AM
To: AAA Put this in the To box


 Paul,

 I was talking to Richard HEDGE, Assembly & Test Cell Manager,
 for Mistral Engines, while at Oshkosh.

 He told me that they will be making mufflers out of Inconel
 as they felt 321 stainless was not heat resistant enough.
 They had to purchase a full sheet of perforated Inconel.

 Knowing that individuals could not afford to do that; around
 the first of the year he expected that they would sell them
 to the homebuilt market.He felt that the price would be
 around $400.info@mistral-engines.com

 Gene Sandburg

 Yes. Richard is now on here.
 That is good news. They should sell a lot of stuff to the
 homebuilt market. That would speed the acceptance for the rotary
 and gain credibility for the certified version. My offer of free
 support still stands

 Paul Lamar

 MISTRAL....are you listening??????

 Y'all allowed me to purchase your intake and it gives me great piece of
 mind having it.I would love to have y'all provide more.Yes, I am
 only a small part of a market, but, I am not the only one here.

 IMAO, (in my arrogant opinion <g), you are not gonna be having folks
 beating down the door with the current pricing, however, proven, solid
 products in flying planes, even kit planes, could sure go a long way for
 marketing a good idea.Heck, it is happening now anyway...just without
 ya.Pity.

 I would rather give my money to you than some local yahoo who does not
 really "get it".In the long run, it could be a savings to the
 individual builder in time, energy, misspent attempts at
 direction/fabrication and money.

 You are smart people, I am guessen' you have considered this, but it
 sure does not seem to be something that would hurt.You are already
 bucking the norm....thus, it seems, you could continue to do so and
 embrace the experimental market.After all, experimental is the future
 of GA. I am building a Velocity, but it is my understanding that Vans is
 putting out (first flights) about 11 planes a week....can Cessna or
 Piper say the same. I think not. Geesh, if you could capture this
 market, you could surly convince the certified market.
 Nothing succeeds
 like success.....but, to quote Dennis Miller....I could be wrong.

 All the best,

 Christopher Barber


 I agree with Chris and Paul on this. I too put my money where my mouth is and
 bought an engine project with a Mistral intake (see attached). I would be happy
 to support them through additional purchases if other parts were offered to the
 experimental market.

 Jack Hilditch

 Nice job on the water pump Jack. Did you do that?

 I think Mistral would sell a lot of PSRU's with constant speed hydraulic
 prop capability's. A side benefit to Mistral would be many hours of testing
 in real world conditions.

 Paul Lamar

Hi Christopher

Where did you get you Servo junction intake part??

I like your conversion for the six ports.

Jean Prudhomme


Jean, I thought Chris had a Mistral intake manifold which is a four port
only. Here is a picture of his airplane I think. The Mistral intake manifold
will not fit a 13B or an RX8 six port and I am not sure but I don't think
it will fit a an RX8 four port either.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.