This for all you 3 rotor guys building slide throttles.
We are not going to do a kit as there are not enough
3 rotors out there to justify the tooling cost.

There are some parts available such as the 2 inch OD connecting tubes
and the throttle cable bracket.

Paul Lamar


Are the intake temps too high to use Delrin instead of PTFE in the slide
throttle?

 Decker, Michael

The coefficient of friction is a lot higher. Therefore when you drive
the engine with the prop the throttle could jam closed.

Plus of course you have a temperature  problem. Especially when hot
soaked after a flight.

Paul Lamar

I guess I just pimping for my favorite material.
Decker, Michael