Subject: Hollow shaft PSRU
From: Rotary Engine
Date: 8/7/2009, 7:32 PM
To: AAA Put this in the To box



 Paul,
 WOW, your timing is almost perfect. This PSRU idea is just what
 I need for a light weight power system.  Would you tig weld
 or friction weld the shaft parts and then heat treat before final machine?
 Dan F

 Do you have friction weld capability? It is great if you have it.
 Lots of stuff is made with friction weld these days.

 Yes I would heat treat and finish grind.

 There is lots of potential for saving 15 or 20 pounds in all these
 hollow shaft designs.

 I am half thinking of producing one for a constant speed metal
 propeller.  The investment would be enormous but I think I could keep
 the price under $3,000. Less the governor of course. The governor
 would be cog belt driven.

 What does everybody think about that?


 Paul Lamar

 If you build it they will come. ;-D
 C. Smith

Don't forget the pusher guys.

Joe

I would want one.
Ernesto



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.