Paul,

My computer would not let me write in a subject.  Who knows why?

What do I need from you for the intake, Jet blocks etc., for my
Renesis 2005 engine and how much will it come to?  I will send
the cash as soon as I know how much.

I will also want the slide kit and the ignition when available.
The ignition should be a real winner.

Gene Sandburg

This question is a little premature as we do not have a
complete set just yet for all the parts. I should know
what everything cost and have it in stock in about a week
or two.

Here is what we have in stock right now and the price.

Sealing blocks are $10 each two per 2R engine.
Pressure taps are $15 each two per 2R engine.
Bell mouths are $5 each two per 2R engine.
Dual skinny Injector blocks are $15 each two per 2R engine.

Pictures and prices can be seen here.
http://www.rotaryeng.net/ under P-port Parts For Sale
near the bottom of the first page.

Remaining parts needed.

Slide throttle kit parts are coming in now. I should
have all parts in about a week. At that point I will know
the price.

Stainless steel p-port tubes. A week or two.

------------------------------------------------

As a service you can send us your good rotor housings
and we will convert them to P-ports. We need to do ten at a time
so there could be a wait.

My guess is about $150 each but that could be high.

Not supplied will be the 180 degree tubes. About $35
each from Burns Stainless and some .032 thick  Teflon $15 from:

SCIENTIFIC COMMODITIES, INC.
P.O. BOX 2458
LAKE HAVASU CITY, AZ 86405
PHONE 800-331-7724
FAX 928-855-0150
E-MAIL SALES@SCICOMINC.COM

These guys gave me prompt service.

There are some variations possible depending on your type
of airplane so there will be some assemble required in the
form of tig welding the parts into a final configuration.


Paul Lamar