Subject: 2nd gen aluminum water pump
From: Rotary Engine
Date: 8/8/2009, 6:25 PM
To: AAA Put this in the To box


Hello all,
Oops, recount of 2nd gen water pump discussion should also
have had fact that Al Gietzen measured stock water pump flow
at 50 GPM @ 6500 rpm and still rising. Flow graph included.
Paul, are there pressure drop/rise figures to go along with
this to calculate the hp requirements?
Dan F

Some but if you stick to the stock pump and pulleys
you will have no problems.

Paul Lamar

Paul
How did Al Gietzen measure the water pump flow?   in situ?  If so I would
dearly love to know the flow meter he used as I would like to repeat
these tests.

Doug in Japan

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.