Subject: 2nd gen aluminum water pump
From: Rotary Engine
Date: 8/8/2009, 10:10 PM
To: AAA Put this in the To box


Paul
How did Al Gietzen measure the water pump flow?   in situ?  If so I would
dearly love to know the flow meter he used as I would like to repeat
these tests.

Doug in Japan


The flow measurements were done on the dyno. The facility had large diameter
cooling plumbing, and a large radiator, so I expect the external pressure
drop was not very high.
I don't know the details of the pump (year, model, etc.) as it came with
the engine from Dave Atkins, and the engine has a 12A front cover.  Quite
sure that it is not the stock 20B pump.  The chart of flow data can be seen
at http://members.cox.net/alg3/Dynamometer%20test%20report.htm
Scroll down to 'Flow Measurements'.  Data is given for runs with and without
the engine thermostat.

Al



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.