Subject: P-port water passages
From: Rotary Engine
Date: 8/8/2009, 3:20 PM
To: AAA Put this in the To box



Hello all,
I remembered something about cooling and found discussion
"2nd gen alum water pump" posted on mon Jul 13, 2009 8:50AM
A quick review...   there is a lot of "urban legend" about
cooling.  Paul recounted that some unknowingly restricted
outlet flow to 25% of stock outlet and others are using
electric water pumps with 20% the flow of stock without
overheating.  Maybe drag racing ap for elect pump?  Anyway,
we still have to be concerned about localized flow/overheating.
The 140 hp Subaru engined pusher currently in my shop uses two
1/2" hoses to the thermostat housing can with the stock EA81
water pump.
Is this an area that we could save hp by slowing down the pump
rpm/using a smaller pump?  Some years ago I had a self contained
water pump off a VW I-4.  Will try to find another if I can find
time to cruise the "recycle" yard.
Also, a Tesla turbine water pump was tested by at least one NASCAR
team.  Don't have $ to get the full story right now,. (all went
to buy a tig welder to finish plane)
See at http://www.teslaengine.org/main.html
Scroll down to issue # 18 for the teaser title  - Tesla pumps used in race cars...
Dan F


What gear ration will you be using with the soob?

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.