Paul
How did Al Gietzen measure the water pump flow? in situ? If so I would
dearly love to know the flow meter he used as I would like to repeat
these tests.
Doug in Japan
The flow measurements were done on the dyno. The facility had large diameter
cooling plumbing, and a large radiator, so I expect the external pressure
drop was not very high.
I don't know the details of the pump (year, model, etc.) as it came with
the engine from Dave Atkins, and the engine has a 12A front cover. Quite
sure that it is not the stock 20B pump. The chart of flow data can be seen
at
http://members.cox.net/alg3/Dynamometer%20test%20report.htm
Scroll down to 'Flow Measurements'. Data is given for runs with and without
the engine thermostat.
Al
Al,
Thanks. Say do you know if the flow sensors Dave Atkins used were
electronic, mechanical, or a combination such as miniature turbine
wheel?
Doug in Japan
Dave Atkins did not do the test. It was done by a Southern California
aerospace engineer. If I told you his name I would have to kill you :)
Here is the flow sensor I used.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.