Subject: 2nd gen aluminum water pump
From: Rotary Engine
Date: 8/10/2009, 1:03 PM
To: AAA Put this in the To box



A little fatherly advice here based on 55 years of building
stuff
from model airplanes to world beating racing cars.
Quit reinventing the wheel.

Paul Lamar


Question is how long did you take to learn this? :)

Back in the 1970's I had a fairly Stock Rally car. Off road events,
and Rx-2's were very cheap in the late 70's.  A friend of mine
would make suggestions, I'd go out and try it to see if it worked
better or not. One item, one change, test it.

What I failed to notice was he was letting me do his R&D for him.
If I was faster, he would do the same change. If I changed it back,
he didn't change anything.

Our engine builder recommended Castrol-R based on his two stroke
days.  We had four freshly built engines.  It gummed up the seals
in all four engines, and all four died early deaths.  Only thing
learned was I drove the most miles, so I wasn't stressing the
engine as much!

Now that I've hit 50....  I just sit back and watch my kids try
things on their own to learn. [But I do keep the fire extinguisher close by!]

Tom







-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.