For those people drilling Teflon for slides you
are going to need a Brad point drill.
A regular drill makes a mess of it.
http://www.wlfuller.com/html/short_length_brad.html

Paul Lamar


Paul

Have you tried a water cutter?

Rick
www.precisioncut3D.com


Yes I have used them before for cutting intake manifold
flanges. They work great.

However cutting this Teflon is something everybody assembling our
slide throttle kits will need to do at home. The straight
parts can be cut with scissors but the small holes need to be drilled.
The large 1 7/8th holes can be cut with an exacto knife as the material
is soft and only .032 thick.

Paul Lamar