Subject: a new plane with a mistral 300HP
From: Rotary Engine
Date: 8/13/2009, 3:30 PM
To: AAA Put this in the To box


 Hi Paul I found this in my search for a new plane.  Prototype is in
 process.

 http://www.shearwateraircraft.com/Technical.html

 All the best

 Marc Joseph

 "The thrust line is low eliminating induced drag."

 This thrust line position does nothing to eliminate induced
 drag due to the thrust line being out of line with the major
 drag sources.

 It also has nothing to do with induced drag due to lift.
 All airplanes have induced drag due to lift regardless
 of the position of the thrust line.

 The tail boom is too flexible.

 If they don't understand this they have no business
 designing airplanes.

 Probably a stock scam anyway.
 Don't send them money yet.

 Paul Lamar


Paul,

How did you determine that the tail is too flexible?

Thanks,
Gordon

Mark II eyeball calibration. AKA 55 years of experience :)
What the designers are forgetting is the twisting turbulence from
the prop. Once your tail falls off you can kiss your ... goodbye
again :)

See the previous message on the 20B e-shaft.

Check out this book. The bible of aircraft design.

Analysis and Design of Flight Vehicle Structures (Hardcover)
by E. F. Bruhn (Author)


http://www.amazon.com/Analysis-Design-Flight-Vehicle-Structures/dp/0961523409

Paul


Paul,

Thank you so much for the response.  I looked at some of the 25% scale model
flights on U-tube and wondered if you could visibly see flexure.  With all
the progress in carbon fibre technology is there a way around this weakness
in the design?

Will the FAA, or New Zealand equivalent, pick up on this when the plane is
submitted for "certification?"  Or, is there even a requirement for a kit
manufacturer to "certify" planes before they go into production?

Thanks,
Gordon

Sure just  make the tail boom  a little bit bigger.
Stiffness goes up to with the  radius to the fourth power.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.