Would anybody like to store the "tune" on
a PC
and be able to look at a graphic of the
whole table as it changed
with RPM and MAP? In other words a
graphic 3D over view
of the fuel injector table. Great for
understanding what is
going on.
Handy for trouble shooting when the
injectors are staged.
Paul Lamar

Sure i am interested
Jean Prudhomme

I too would love this.  I think someone at the Texas
Rotary Roundup a
 couple of months ago had something he was using, but it
was not yet
 ready for "prime time".  There MAY have been some
discussion about
 making it available.  I know I would like it
especially IF it were not
 outside my electronic skill set to be able to use. IIRC, he had a
 serial interface cable that would link to the PC and then
some software
 which would provide data.
I understand Tracy's desire to be able to program
everything w/o a PC,
 especially in the air AND based on when it was first
developed, however,
 with $200.00 netbook computers and so much initial
development on the
 ground, I would love to be able to "see" more of what I am
doing via a
 netbook/notebook 'puter.  FWIW.
All the best,
Chris Barber
 Houston
 wings back on my Velo hoping to restart after my EC2's
round robin to   Tracy <g


Paul,

You are correct, Ed's instrument is not an addition to
Tracy's it is
INSTEAD of.  IIRC, he developed it when Tracy did not
have one.  I spoke
to Ed about it at the Texas Roundup and asked about using
it too, but he
assured me it was not needed if I had Tracy's unit. It is more
colorful, but is redundant.

The other unit I was speaking of is different and works
thorough a
serial interface to a PC and I believe allows data logging
from the EC2
(which is an add on in the newer EC3) and lets you see
more/most/all (?)
of the MAP table.

Chris Barber
Houston

Do you have a web site address on it?

Paul Lamar

Chris,

Steve Bose (sp?) had the data logger he was using with Tracy's controller.
He did a demo at the Rotary Roundup earlier this year.

No charge for the software, just make your own interface box (couple
of IC's).

Tom

Anybody have Steve's email address?

Paul Lamar