Subject: Response to George Grimes
From: Rotary Engine
Date: 8/14/2009, 8:17 AM
To: AAA Put this in the To box


Hi Paul
I use this e-mail to be able to send you copy of the photo a French
Canard Rotary engine Pusher.
I try to locate the guy by them registration a while ago but no success ,
someone know about this plane
Jean Prudhomme

Jean, The picture seems to show a wide flattened faring on the nose gear
which would seem to make it unlikely to be a retractable nose gear. Could it
be a sterable rather than castering nosewheel to help with yaw control with
a shut down engine?Also notice the rear dorsal fin between the props doesn't
look as sleak as the rest of the plane, more like an experimental part
possibly to reduce wake vortex if the props are counterrotating. Possibly
someone on the canard zone forum mght know what it
is.

george grimes

I got your disk George but Rhino cannot make heads or tails out of them.

Paul Lamar

Hi George

I

contact the builder to have more historique and photos and
i will forward as soon i get it.

Thank,s Paul for information on carbon tubing shaft supplier
and i still working on the reduction gear system and waiting
for your propeller shaft design idea and carbon fiber attachement
method on bearings locations, i am open to take all suggestions

Jean Prudhomme


I'll work on that this week end Jean.
I am still getting things together for the slide throttle and p-ports.

Paul Lamar

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.