The slide throttle bracket is in. Will work with
a 3 rotor.

It will be part of the slide throttle kit as soon
as we get the two missing parts that are still in the
NC shop.

If you want one for a 3 rotor slide send $15 + $5
cash only for a flat rate box. No checks.

We are also nearly out of pressure taps for Tracy's EFI
that screw into the oil injector port. How many
are interested in this part as I will have to make
more?

Paul Lamar

Paul,
I was going to order the pressure taps and the sliding throttle assembly
together, so you can put two hash marks on the wall for me.  Just to make
certain I am not off base here, my engine will be a two rotor 13B, with
compound turbo, as soon as you start cranking those out. . .

Thanks,
Gordon

Well as much as I would like to do that I don't have the resources.
My guess it will take a really big company to do that.
Hopefully Mazda will see the light

Paul Lamar

Paul,

Are the pressure taps designed to work with a standard (NA) 13b, or just
the
PP
installations? If they will work with my 13b, I'll take a pair.

Thanks,

Jack Hilditch

They will work with the side port engine but if you have a large plenum
like
Tracy uses you may not need them. They are mainly designed to work
with tuned intake systems that have a lot of pressure variations.

Paul Lamar



Paul--
Please count me in for a pair of the pressure taps.  I'll be going with a
13B NA P-port.  Thanks!

Paul Vermillion

Paul,
You should already have me down for a slide throttle bracket.  I should also
be on the list for three of the SS tubes whenever they become available.
You can put me down for 3 of the pressure taps as well.

Thanks,
Mark S.
Austin

OK Mark. I'll save everything until I have them all and mail them
in one box. I'll let you know when they are ready.

Paul Lamar