The slide throttle bracket is in. Will work with a 3 rotor.

It will be part of the slide throttle kit as soon as we get the two missing
parts that are still in the NC shop.

If you want one for a 3 rotor slide send $15 + $5 cash only for a flat rate
box. No checks.

We are also nearly out of pressure taps for Tracy's EFI that screw into the
oil injector port. How many are interested in this part as I will have to
make more?

Paul Lamar

Paul,
I was going to order the pressure taps and the sliding throttle assembly
together, so you can put two hash marks on the wall for me.  Just to make
certain I am not off base here, my engine will be a two rotor 13B, with
compound turbo, as soon as you start cranking those out. . .

Thanks,
Gordon

Well as much as I would like to do that I don't have the resources.
My guess it will take a really big company to do that.
Hopefully Mazda will see the light

Paul Lamar

Paul,

Are the pressure taps designed to work with a standard (NA) 13b, or just the
PP installations? If they will work with my 13b, I'll take a pair.

Thanks,

Jack Hilditch

They will work with the side port engine but if you have a large plenum like
Tracy's uses you may not need them. They are mainly designed to work with
tuned intake systems that have a lot of pressure variations.

Paul Lamar

I've got the Mistral system (see attached).

Jack Hilditch

Lucky you :)
Do you have the Mistral computer or Tracy's computer?
If Tracy's you could probably use the pressure taps.
You will get a smother MAP signal.

Paul Lamar

Jack Hilditch, nice intake-are mistral parts available to the average
JOE?-james whitehurst