Found my EC2 I am slowing getting the hangar more
organized so I can find things.

It is EC2 Rev-A 13b NA

9-29-2000

#228 is on the mother board.

I forgot your web site address Bob where I fill out
the forms  for ordering  the wiring harness.
What is it again?

Since I am going to use it on the prop dyno
are there any drawbacks to using an extra long cabling
to the control sw panel?

Paul Lamar


Hi Paul,

http://roblinstores.com/cables/index.php?main_page=product_info&products_id=1
to go straight to the EC2 cable.  I don't know of any specific problem
with the long switch panel run.  They are fairly long in the pusher
installations.  Some of those have seen more noise pickup problems, but
at least you can move the cables around if needed.  Mainly separate the
coil trigger leads from the coil power and injector leads.  I can use
20 gauge wire for the long switch panel to lower the resistance.

If you don't want to register with all the customer info, just send me a
list of the items and length or option.

Bob W.