Subject: OT but very funny
From: Rotary Engine
Date: 8/22/2009, 8:25 PM
To: AAA Put this in the To box


This is kind of off topic, but there are links to some other interesting
stuff.

The Haynes manual page is good for chuckles too.

Enjoy!

http://www.mez.co.uk/lucas.html

C. Smith
I don't see anything funny...except maybe the stuff about the Land Rover...
I owned three TR3s in my day, and my friends owned MGAs and an Austin
 Healey Sprite. Have no idea what that web page is talking about! <G
Harley
I had a Sprite too. The same part would keep failing over and over.
 I had a cast iron rear brake cylinder fail! Who ever heard of
 that happening? I suspect the problem was quality control
 on the British material.
Paul Lamar


Paul, I had an MG midget, nice litle car, a sprite with a chrome strip on
the side. I was in a 24 hour rally with it in 1972 and came up on a TR3 in
the middle of the road at night. We stopped to offer headlights while he cut
wireing out of the tail lights to rewire his ingntion which quit with the
total loss of his under dash wireing harness. He declined and passed me 2
hours later while I was changing the condensor in the distributor on the
MG.I also rode my Royal Enfield  interceptor into a creek one night when the
headlight wireing came apart at  90 mph on a country road in WVa. The Lucs
CD ignition on that bike has never been a problem almost making up for the
myrad of electrical failures of every description on the 1968 Enfield with
the Lucas magneto the princess of darkness. Put me down as enjoying the land
rover post.

george grimes
I had a '54 MG TF in the early 60's and everything went wrong with it.
The shocks failed the brakes failed, the voltage regulator failed,
the arm fell of the distributor rotor, the engine swallowed a valve
and it caught fire once. And, that was all in the first year I owned it.
Was a neat looking car though.  The girls liked it.

Vince Homer

You guys may have had this or that, but at this very moment, I am slowly
getting my rotary airplane engine installed in a 1967 Sunbeam Alpine.
All thats left before engine start is to install the fuel pump and fuel
lines, fit the top radiator hose and heater hoses, and do all the
electrical work.

I will have to contend with Lucas lights, horn, wipers, heater fan,
etc.,  but everything needed to run the engine will be my own custom
wiring harness.

One thing I found when I removed the old instruments was that the ground
for the light on each instrument was a separate wire daisy chained to
the next light, and finally a wire to ground.  A loose connection
anywhere along the path would make multiple lights fail.  Poor
workmanship may have lead to as many problems as poor design and poor
quality parts.

The last Sunbeam I owned left me sitting along the side of I-40 when
the engine stopped running.  I forget what the problem was as it was
about 25 years ago.  I'm pretty sure it was electrical.  I've always
liked the look of the car though.

Bob W.


-- 
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.