Subject: OT but very funny
From: Rotary Engine
Date: 8/23/2009, 4:46 AM
To: AAA Put this in the To box



This is  kind of off topic, but there are links to some other  interesting
stuff.

The Haynes manual page is good for chuckles  too.

Enjoy!

http://www.mez.co.uk/lucas.html

C. Smith
I  don't see anything funny...except maybe the stuff about the Land Rover...
I  owned three TR3s in my day, and my friends owned MGAs and an Austin
Healey Sprite. Have no idea what that web page is talking about!  <G
Harley

I had a Sprite too. The same part would keep failing over  and over.
I had a cast iron rear brake cylinder fail! Who  ever heard of
that happening? I suspect the problem was  quality control
on the British material.
Paul  Lamar


Paul, I had an MG midget, nice litle car, a sprite with a  chrome strip on
the side. I was in a 24 hour rally with it in 1972 and came  up on a TR3 in
the middle of the road at night. We stopped to offer  headlights while he
cut
wireing out of the tail lights to rewire his  ingntion which quit with the
total loss of his under dash wireing harness.  He declined and passed me 2
hours later while I was changing the condensor  in the distributor on the
MG.I also rode my Royal Enfield  interceptor  into a creek one night when
the
headlight wireing came apart at  90  mph on a country road in WVa. The Lucs
CD ignition on that bike has never  been a problem almost making up for the
myrad of electrical failures of  every description on the 1968 Enfield with
the Lucas magneto the princess  of darkness. Put me down as enjoying the
land
rover post.

george  grimes
I had a '54 MG TF in the early 60's and everything went wrong with  it.
The shocks failed the brakes failed, the voltage regulator  failed,
the arm fell of the distributor rotor, the engine  swallowed a valve
and it caught fire once. And, that was all  in the first year I owned it.
Was a neat looking car  though.  The girls liked it.

Vince Homer

You  guys may have had this or that, but at this very moment, I am  slowly
getting my rotary airplane engine installed in a 1967 Sunbeam  Alpine.
All thats left before engine start is to install the fuel pump and  fuel
lines, fit the top radiator hose and heater hoses, and do all  the
electrical work.

I will have to contend with Lucas lights, horn,  wipers, heater fan,
etc.,  but everything needed to run the engine  will be my own custom
wiring harness.

One thing I found when I  removed the old instruments was that the ground
for the light on each  instrument was a separate wire daisy chained to
the next light, and finally  a wire to ground.  A loose connection
anywhere along the path would  make multiple lights fail.  Poor
workmanship may have lead to as many  problems as poor design and poor
quality parts.

The last Sunbeam I  owned left me sitting along the side of I-40 when
the engine stopped  running.  I forget what the problem was as it was
about 25 years  ago.  I'm pretty sure it was electrical.  I've always
liked the  look of the car though.

Bob W.


-- 
N93BD - Rotary Powered  BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables  for your rotary installation - http://roblinstores.com/

Wow. I just  have to comment here. Recently had to trouble shoot the latest
failure of  a
Brush/Dynamotive Chassis Dyno. There was something on a fused power  buss
that failed and was
blowing the fuse. The daisy chain wiring  path had me using short words.
These machines are
definitely UK  spec. Finally found the failed data switch at the end of the
wire so to  speak.
C. Smith



"Lucas"
is a legal swear word world over. I had a Lucas Battery disconnect  switch
disassemble itself in a race.
The crimp around the base was not fully formed and the guts fell out
because of the moon phase/ humidity/distance from the Sun/ time of day/name of
race track/ color of race car, milk price support number..

The Western Gear corp in Utah was bought out by J.I. Lucas years ago.
Western makes Flap drives, elevator trim ball screws, for Boeing, and
transmission gears for helicopter transmissions for many makes of  helicopters.
The annual pony show was coming to our government operation and it was to
be the last for the old fellow who had done this for many years. He had his
13  year old (looking) English replacement with him to learn the ropes.  At
the  end of the show, I presented the old Mormon with 5 of the Lucas bumper
stickers.  He was delighted, as the whole plant had been researching Lucas,
the new owners.  The Englishman had not been aware of the Lucas reputation.
He was livid.

A week later the plant managers secretary called me to find out where she
could buy large quantities of those awful stickers.

The two most feared words in aviation:

Lucas Aerospace.

Lynn E. Hanover


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.