This is kind of off topic, but there are links to some other interesting
stuff.
The Haynes manual page is good for chuckles too.
Enjoy!
http://www.mez.co.uk/lucas.html
C. Smith
I don't see anything funny...except maybe the stuff about the Land
Rover... I owned three TR3s in my day, and my friends owned MGAs
and an Austin Healey Sprite. Have no idea what that web page is
talking about! <G Harley I had a Sprite too. The same part would
keep failing over and over. I had a cast iron rear brake
cylinder fail! Who ever heard of that happening? I suspect the
problem was quality control on the British material. Paul Lamar
Paul, I had an MG midget, nice litle car, a sprite with a chrome
strip on the side. I was in a 24 hour rally with it in 1972 and
came up on a TR3 in the middle of the road at night. We stopped to
offer headlights while he cut wireing out of the tail lights to
rewire his ingntion which quit with the total loss of his under
dash wireing harness. He declined and passed me 2 hours later while
I was changing the condensor in the distributor on the MG.I also
rode my Royal Enfield interceptor into a creek one night when the
headlight wireing came apart at 90 mph on a country road in WVa.
The Lucs CD ignition on that bike has never been a problem almost
making up for the myrad of electrical failures of every description
on the 1968 Enfield with the Lucas magneto the princess of
darkness. Put me down as enjoying the land rover post.
george grimes
I had a '54 MG TF in the early 60's and everything went wrong with
it. The shocks failed the brakes failed, the voltage regulator
failed, the arm fell of the distributor rotor, the engine
swallowed a valve and it caught fire once. And, that was all in
the first year I owned it. Was a neat looking car though. The
girls liked it.
Vince Homer
You guys may have had this or that, but at this very moment, I am slowly
getting my rotary airplane engine installed in a 1967 Sunbeam Alpine.
All thats left before engine start is to install the fuel pump and
fuel lines, fit the top radiator hose and heater hoses, and do all the
electrical work.
I will have to contend with Lucas lights, horn, wipers, heater fan,
etc., but everything needed to run the engine will be my own
custom wiring harness.
One thing I found when I removed the old instruments was that the ground
for the light on each instrument was a separate wire daisy chained
to the next light, and finally a wire to ground. A loose
connection anywhere along the path would make multiple lights fail.
Poor workmanship may have lead to as many problems as poor design
and poor quality parts.
The last Sunbeam I owned left me sitting along the side of I-40
when the engine stopped running. I forget what the problem was as
it was about 25 years ago. I'm pretty sure it was electrical.
I've always liked the look of the car though.
Bob W.
--
N93BD - Rotary Powered BD-4 -
http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation -
http://roblinstores.com/
As I remember my MG was positive ground. Who ever came up with
that idea? I eventually put a Volvo engine in it and then I
really had fun sorting out the instruments.
Vince Homer
What I would like to know is; is the jar of harness smoke negative or
positive ground variety.
Dale Davies
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.