Thanks guys for all the help.
I have been trying for almost a week to get Ubuntu 6.06 "Dapper Drake" version
of Ubuntu installed. I have at least 3 or 4 older mother
boards and half a dozen video cards. Apparently
Ubuntu is real picky about video chip sets.
I finally found an ATI video card that seems work.
"Basic Installation from one of the EMC2 Live CD's is easier and faster
than ever."
Well not exactly. I depends on how you save the image on a DVD
Fedora 8 Linux gives you an option. Image or file. If you choose
file it does not work. I found that out the hard way.
I find that Red Hat and Fedora are much easier to install
on a variety of hard ware. Ubuntu keeps you in the dark while it is
installing. There is nothing on the screen that tells you what, why or how
it is doing. After awhile you think the program has crashed and you hit
reset.
I have tried two versions so far. Ubuntu 6.06 and Ubuntu 9.04
They both appears to have the same problem on a variety of hardware.
EMC2 requires Ubuntu 6.06.
Also I suspect they do not like to install over other versions of Linux.
I bought Disk Purge to wipe an old Red Hat Linux drive clean and then used
Vicom Partition Commander to partition the disk and format it. That seemed
to help. No info in the instructions on the preferred file format so I used
Linux ext3 which may be a mistake.
I can highly recommends a $50, 1500 page book called Upgrading and Repairing PCs.
by Scott Mueller. There is a Linux version out. This is a complete history
of the PC going back to early IBM's and all the variations of CPU's and chip sets.
There are many.
I almost have it working. The Ubuntu 6.06 is running off the DVD right at
the moment and trying to install itself on the hard drive. It takes
so long that I left it running in the hangar and will go back latter to see
if it will boot from the hard drive.
Paul Lamar
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.