Subject: Help on mother boards Kasuga upgrade project.
From: Rotary Engine
Date: 9/3/2009, 3:57 PM
To: AAA Put this in the To box



 Snip.....
 ----------------------------------------------

 I changed to 804 and it does pretty much the same things.

 I went out and spent $400 bucks on a new MegaByte mother board, processor
 and memory. Guess what. Unbuntu refused to load.

 In frustration a grabbed and old Fedora 5 and stuck it in the DVD drive.
 Guess what? It loaded right off the bat with no problems.

 Fedora install program is ten times better than Ubuntu keeping
 you well informed on what it is doing, why it is doing what it is doing
 and how long it is going to take. Unbuntu sometimes gives you a blinking
 cursor
 and other times nothing and sometimes the light blinks on the DVD drive.

 Fedora 5 also loaded on the board above with no problems.

 BTW there is no need for half the stuff on the install distro.
 Who is going to use open office on their mill computer??
 If they removed half that useless stuff it would take a lot less time
 to load and install.
 --------------------------------------------------

 I took that GigaByte mother board back and got my money back.
 Worst mother board and BIOS I ever had the displeasure to use.

 BTW the hot tip is to install Fedora first and let
 it scope out the hard drive. It does a much better job.

 Then install Ubuntu if you must :)

 Paul Lamar


 Paul,

 Sorry to hear that you are having so much trouble loading Ubuntu.

 I went to the Gmane linux emc users forum and typed in "grub error 18" and
 got a lot of hits.

 See here:


http://search.gmane.org/search.php?group=gmane.linux.distributions.emc.user&
 query=grub+error+18

 I also found a debug trick that might help you, here is a partial quote
 from
 one of the above web site hits:

 "...when the system is first booting up, right after the
 manufacturer's splash screen (if any), it says :
 GRUB loading, please wait...

 Hit ESC at that time, and you get a menu.  Generally the last
 item on the menu is the Memtest86 program, just hit the down
 arrow key to highlight that entry and h it return.  This
 diagnostic will run forever if it finds no errors, otherwise it
 will list what it has found wrong, at a fairly technical level.
 But, what you are looking for is the presence or absence of
 error reports.  It may also be that your BIOS settings have
 gotten corrupted, or that someone overclocked the computer for
 gaming, and the settings are not correct for proper operation.
 Most BIOS setup screens have some option to return all settings
 to default, you might try that if you haven't made any special
 settings for specific hardware compatibility."

 Good luck,
 Tom

 Yes I did that Tom. That works for testing the memory.
 One of the neat things about it is it times it self.
 When I first used the SOYO board it would run for 12.5 minutes
 and crash. Turned out there was a linear voltage regulator on
 the board that was overheating and shutting down.
 I dug up an old 115 volt 13 watt AC fan I had lying around
 and applied that sledge hammer. Problem went away. I am looking
 for a heat sink to glue to the top of the linear regulator chips.

 ---------------------------------------------------------

 I ordered ten of these heat sinks so if anybody needs some let
 me know. I'll sell up to six for $5 each plus $5 flat rate mail cash
 only. They are 15 by 15 mm so they will glue down on top. Comes
 with the proper glue.

 All the new mother boards use the 12 Volt supply for the processors
 with these linear regulators  dropping it down to 3 volts or so
 for the processor. In fact there are separate lines from the new power
 supplies that are dedicated to the processor power alone. If you don't
 connect them up the processor won't boot. Been there done that.
 See the JPG.

 Consequently these regulators run hotter than
 hades when you are running the new 3 Giga Hertz high speed, high power
 processors. These board use over 500 watts of power which is
 about 2/3rds of a HP.

 Paul Lamar


Sorry to hear you had a problem with the Gigabyte board. That's rather
unusual as Gigabyte has a history of turning out quality work. Just be glad
you didn't get an ASUS. Besides, quad core is a *bit* overkill for a NC
machine, no?
Vlad

Yeh they sure look good cosmetically with nice blue paint and white
lettering :)
In my mind the jury is still out on quad core for real time. I would think
you need to get the fastest processor possible as it takes a certain amount
of time to refresh the DRAM. Unfortunately one cannot buy static RAM in
large sizes. I have not looked at the source code for the real time
modification
of the Linux kernal but since it is written in C I would not know what I was
looking at anyway. I wrote my real time OS's in assemble language using
static
RAM. Also as I recall the memory manager is not predictable when the code
is written in C. Intel processors do not have a linear address space unless
they have changed it recently therefore they must bank switch across 64K
boundaries. The old Motorola 68000 had a 32 bit 4 gig linear addressing.
When The Intel bank switches is therefore unpredictable as well.


Paul Lamar

---------------------

Paul,
Since I have Ubuntu/EMC2 loaded on a multi-processor Dell, I did a little
research into the setting up a symmetrical multiprocessor realtime kernel
(smp rtai). There is some information on using it on a multi-core/
multi-processor machine here:

http://thread.gmane.org/gmane.linux.distributions.emc.user/528

Also below from my notes (copied from the above
gmane.linux.distributions.emc.user forum)

" Douglas Pollard wrote:

I bought a used IBM Think Centre 3 ghz. intel chip that after a latency test proved to be useless  in running EMC2.   I also have an Hp   dual core  64 bit  machine that is my personal desktop machine. 2.4 ghz  1 g ram I thought EMC2 would not run on it.

EMC2 should run just fine - our kernel doesn't really care if there are
extra cores around.  It just doesn't use them.

I recently saw someplace on line saying it could run on one of the chips but not both. Does anyone know anything about this.  I really don't want to go looking for another used computer.

This is true of the "official" RTAI kernel we provide.  A user has
kindly built multiprocessor-aware RTAI kernel packages, which are at
<http://www.linuxcnc.org/experimental/hardy/smp/>.  Use at your own
risk, no support, etc. etc.  I believe several people have tried this
kernel, and I don't know of any problems with it, but of course your
mileage may vary.

There is no live CD with the SMP kernel, so you have to install
EMC2-Ubuntu, then manually download and install the SMP kernel packages
(which can be done with the GUI by right-clicking on them and selecting
"install using Gdebi")."


You can do a search on the forum for more information on the smp rtai.

Tom Feldvebel

Thanks Tom.

I think a lot of the problems attributed to the mother board may be caused
by something else. Ubuntu/UMC is picky about the state of the hard drive.
If you are using an old hard drive I suggest loading something else
on it (even Windows XP) and see if it is working first. We do know of course
it only likes ATI video cards.


Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.