Subject: Adapter-plate-schertz beam combined.
From: Rotary Engine
Date: 9/6/2009, 10:58 AM
To: AAA Put this in the To box



Weighs 5.4 pounds so it saved six to nine pounds over
the adapter plate and schertz beam combination.

I added the extra RX8 mounting bolt at the top but I still need to
tweek a couple of things.

The rubber bushing cups are tig welded to the adapter plate.
It is asymmetrical so it will work with a side or bottom rad
configuration.

http://www.barrycontrols.com/companyinformation/


-------------------------------------------
Second iteration. I moved the right mount in about an inch
to give more room for side rads. I moved the left mount in
about 3 inches because we don't need it out there so far to clear
turbo's and mufflers. The starter was moved down for more air flow
past the plate. I am thinking maybe the bottom is the best place
for the starter as most cowls have scoops in that area so it
would be a good place for an oil cooler.

New weight is 5.1 pounds less the cups.

BTW guys Dynafocal rubber bushing (you need 4) can cost up to $100 each
while the Barry industrial types we use cost less than $10 each.

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.