Weighs 5.4 pounds so it saved six to nine pounds over the adapter plate
and schertz beam combination.

I added the extra RX8 mounting bolt at the top but I still need to tweek
a couple of things.

The rubber bushing cups are tig welded to the adapter plate.
It is asymmetrical so it will work with a side or bottom rad
configuration.

http://www.barrycontrols.com/companyinformation/


Paul Lamar

    That's a lot of weight savings, especially on the back of a
pusher... I'm in! you plan on taking orders Paul?  Just a couple of
questions... Looks like it is wide enough to work on a turbo and is the
bolt Pattern fit a 13B also?

Mike C.

Yes on the 13B. Just one bolt is missing that is on the RX8
rear housing.

Paul Lamar