Subject: Tape Glue on a Canopy
From: Rotary Engine
Date: 9/13/2009, 2:49 PM
To: AAA Put this in the To box


 A while back I saw some advice on how to remove tape glue residue from
 a canopy... For the life of me I can't find the posting. I was thinking
 WD40 would work but wanted to check with the group and get some advice
 on what works best.

 Mike C.

 A mixture of 3% or 5% denatured alcohol in paint thinner is a powerful
 solvent for the adhesives used on tapes and labels and is harmless to
 most plastics. It is sometimes used as a rubber cement thinner. Most
 rubber cement thinners sold today are quite different and may attack
 plastics. Try this on a scrap. Note there is some water in denatured
 alcohol and some water will separate out on mixing with paint thinner.
 Means nothing.

 Al Rees


 Try GOO GONE



 Jean Prudhomme


 If I remember correctly, I used mineral spirits on my canopy.
 Don't quote me on that, but you can give it a try on a piece of scrap.

 Brian Trubee

This will definitely remove the adhesive.  I used some double-sided
tape and tried removing the residue.  I tried everything that I
could think of, which was considerable.  Then I tried MEK (methyl
ethyl ketone).  It removed it instantly, and worked on masking tape.
BUT, BUT, BUT, I did not try it on plexiglass.  That may damage it,
so try it on a scrap first!!
Gene Sandburg


I know you're gonna get a kick out of this... but you gotta know that using
peanut butter will also emulsify the glue as well!!!... and it doesn't
scratch the surface!!!   I've even used the middle of a Reese's to remove
gum from a car's paint and windshield surface!!

Ok.. .now you can laugh at me!!

Gary Buster
East Texas
N263GB

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.