Subject: Tape Glue on a Canopy
From: Rotary Engine
Date: 9/13/2009, 2:50 PM
To: AAA Put this in the To box


 A while back I saw some advice on how to remove tape glue residue from
 a canopy... For the life of me I can't find the posting. I was thinking
 WD40 would work but wanted to check with the group and get some advice
 on what works best.

 Mike C.

 A mixture of 3% or 5% denatured alcohol in paint thinner is a powerful
 solvent for the adhesives used on tapes and labels and is harmless to
 most plastics. It is sometimes used as a rubber cement thinner. Most
 rubber cement thinners sold today are quite different and may attack
 plastics. Try this on a scrap. Note there is some water in denatured
 alcohol and some water will separate out on mixing with paint thinner.
 Means nothing.

 Al Rees


 Try GOO GONE



 Jean Prudhomme


 If I remember correctly, I used mineral spirits on my canopy.
 Don't quote me on that, but you can give it a try on a piece of scrap.

 Brian Trubee

This will definitely remove the adhesive.  I used some double-sided
tape and tried removing the residue.  I tried everything that I
could think of, which was considerable.  Then I tried MEK (methyl
ethyl ketone).  It removed it instantly, and worked on masking tape.
BUT, BUT, BUT, I did not try it on plexiglass.  That may damage it,
so try it on a scrap first!!
Gene Sandburg


WD-40 or Aero-Kroil also work nicely.
Terry


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.