Check with Jeff. The NC pocketed adapter plate weighs about 5 pounds
but it
does two jobs. I does both the scherts beam and the adapter plate.
You will need an adapter plate anyway.
Paul Lamar
Paul, does Jeff have the final files ready for production? If you could
forward my personal e-mail to him, I would like to move forward, if he is
ready to produce product. I have his phone number, but I think e-mail is
better, you have a record of discussion, don't have to write down things,
and an e-mail will never interrupt your dinner.
As for material, the blanks would be 15"x30"x0.500" 6061-t6? We could
do it
either I have online metals ship blank directly to him, or send
payment and
he can procure material through his own sources. Not sure if he is cash
only, or up for MO or check. I guess there is also the aluminum cups
for the
Barry mounts too... I don't know what the blank dimensions for that would
be. I now have TIG capability in my hangar.
For now I'll hold off on modifying the PSRU housings, as that may
affect any
warranty from Tracy. Then again, I won't be flying for a couple years
anyway.
C. Smith
I can send the stp files to Jeff anytime he wants them.
I have stp files on the Barry bushing cups as well.
Here are the 2D dxf's zipped Jeff.
jeff doddridge <
4starr@cox.net
Paul Lamar
Paul
I opened up the files and see the entire rendering of the engine
package...I need the part separated out..When you sent the STL. it
worked fine. X_T works better it's a native parasolid kernel. SW likes
this..
thanks
jeff
You got me there Jeff.
What is X_T ?
What is a "native parasolid kernel" ?
These stp files import directly into SW.
If you have trouble Jarrett does it from time
to time and makes SW adjustments from time to time
depending on how good a job I do with Rhino V3. What
Rhino V3 does not do worth a damn is fillets on variable
radii.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.