Still looking at the idea of the front engine mount material.
This would be using Tracy's PSRU unit. Using 15" x 30" x 0.375" 7075-T6
Plate. Material wise 7075-T6 would be stronger than 0.500" 6061-T6 that is
normally used.
Originally thought of using a 3" x 3" x 0.125" 7075-T6 36" long tubing for
the "s-beam" function.
(Original is 4130 x 0.063" box material). My concern is fatigue and heat
from the exhaust adding to fatigue.
Just looking for guidance. Approx 12# for PSRU plate, 5# for the 3" sq.
"s-beam".
Tom Walter
Bearhawk Builder
In one direction 3/8 7075 -T6 would be but it would be less stiff in the
fore and aft direction.
The main problem with the aluminum schertz beam is heat transfer from the
end housing into the beam. I think a 3" by 3" by .125 thick might be OK but
the fatigue limit of aluminum is not near as good as 4130.
Have you located a source for this tubing?
The adapter plate is once removed from the engine and much stronger.
However you can make your own silicone rubber bushings. Barry will also sell
you silicone rubber bushings I think. Should be good to 500 F.
Check with Jeff. The NC pocketed adapter plate weighs about 5 pounds but it
does two jobs. I does both the scherts beam and the adapter plate.
You will need an adapter plate anyway.
Paul Lamar
Paul, does Jeff have the final files ready for production? If you could
forward my personal e-mail to him, I would like to move forward, if he is
ready to produce product. I have his phone number, but I think e-mail is
better, you have a record of discussion, don't have to write down things,
and an e-mail will never interrupt your dinner.
As for material, the blanks would be 15"x30"x0.500" 6061-t6? We could do it
either I have online metals ship blank directly to him, or send payment and
he can procure material through his own sources. Not sure if he is cash
only, or up for MO or check. I guess there is also the aluminum cups for the
Barry mounts too... I don't know what the blank dimensions for that would
be. I now have TIG capability in my hangar.
For now I'll hold off on modifying the PSRU housings, as that may affect any
warranty from Tracy. Then again, I won't be flying for a couple years
anyway.
C. Smith
I can send the stp files to Jeff anytime he wants them.
I have stp files on the Barry bushing cups as well.
Here are the 2D dxf's zipped Jeff.
jeff doddridge
<4starr@cox.net>
Paul Lamar
Paul,
Thanks. I made the mistake of thinking of stress ratings, not rigidity.
Both 6061-T6 and 7075-T6 have almost the same Modulus of Elesticity. So
looks like I need to stick with 0.5" either way. Now for Tensile strength
being almost 2x, it means if that 6061 plate is good for 500 ft-lb of
torque, a 7075 plate will good better for that 800 ft-lb engine. Yes, it
has been a few years since I had a materials class. <grin>
Good catch, I had written of 7075-T6 3" Square tubing. I should have written
6063-T6 as it would
be extruded tubing! I was thinking 6061 but typed 7075! Ouch. Hate making
mistakes likes that!
Using a a Milling machine w/ DRO doing the layout for holes is pretty
straight forward. Milling out pockets for weight reduction is not likely, as
too time consuming to repeat. Yes, I've done circles by carefully cranking x
and y wheels at the same time. Too nerve wrecking on expensive material.
Cutting MDF for patterns is another thing (pattern is for hammer forming a
sheet of alumnum shape... oh I have a long way to go on that task).
Tom
I love 7075 T6 I used to make my race car wings out of .016" thick
7075 T6 razor blade stock :) They weighed nothing :)
Problem is it don't weld worth a damn.
Jeff is offering to do the whole thing for about $200 out of 1/2 inch 6061 T6.
Well worth it IMHO.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.