I'll be putting together the kit shortly.
The aluminum slide version cut the cost of the Teflon
by a bunch. Now you buy thin (.032") sheets of Teflon and bolt
them between the spacer and the cover.
It also cut the length of the slide giving more
room behind the engine for the throttle cable.
No need for the steel button embedded in the
solid Teflon slide.
I'll do some pictures of the process and the kit soon.
Paul Lamar
Have you finalized the price yet Paul?
C. Smith
No I have not added things up yet but it will be close to
my previous estimate.
I looked up the old cost offered by Doc Custer in June 2007
and it was $425. He went a bit over board making everything
on a NC mill.
My guess right at the moment is $180 less the Teflon.
There is no price break on Teflon. Buy direct.
Front and back covers. Aluminum slide, spacer and throttle bracket.
The intake tubes are welded to the front and back covers
for simple installation. No nuts or bolts.
USPO Shipping will be about $15 for the flat rate.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.