Subject: file transfers prootcols. Setp verses iges.
From: Rotary Engine
Date: 9/14/2009, 11:00 AM
To: AAA Put this in the To box




Paul

I opened up the files and see the entire rendering of the engine
package...I need the part separated out..When you sent the STL. it
worked fine. X_T works better it's a  native parasolid kernel. SW
likesthis..

thanks
jeff

You got me there Jeff.

What is X_T ?
What is a "native parasolid kernel" ?

These stp files import directly into SW.
If you have trouble Jarrett does it from time
to time and makes SW adjustments from time to time
depending on how good a job I do with Rhino V3. What
Rhino V3 does not do worth a damn is fillets on variable
radii.

Paul Lamar


No doubt about it, Parasolid is my choice of file type where possible.
Your other option is IGES [IGS] but that would be a secondary pick. STL is
absolute bottom of the barrel in my opinion. It's a 'graphic' file rather
than an actual object/surface file. [Same w/ a OBJ file]..

Fwiw..

Jarrett



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.