Prop shaft mounting drawings.

Jean

Hi Jean,
I forgot about asking how you will get the outer seal in place. It looks
like it is between the prop flange and an oil slinger.

Dale Davies


To install the front seal on crankshaft we have to do the same way we
install the seal on lycoming engine,we remove the spring inside of
the seal and warm up the seal on hot water and it stretch enought to
past ovet the prop flange and then replace the seal inner spring.

On my case i have to pas over the trust bearing flange wich is lot smaller

Jean Prudhomme

The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.