Subject: Slide throttle pics and kit cost
From: Rotary Engine
Date: 9/17/2009, 7:39 PM
To: AAA Put this in the To box

Looks like everything is coming together all at once.

The rest of the slide throttle parts came in for the kit.
The .032" thick Teflon is not included but it cost about $28
for the sheet shown. You get an extra piece for a spare.
It is easily cut with an exacto knife.

Tom did a great job on the spacer and the slide.

Bolt the two covers over the Teflon when you drill
it as Teflon is not easy to drill. The pre punched
covers will hold it in place. No need to bond it
to the covers. This means it is replaceable. The cover
bolts and slide keep it in place.

Not included in the the kit is the nuts and bolts or
the runner tubes. You can buy those from Burns Stainless.
This is the way they come. They are not cut to the proper
length yet. They will be shorter of course. The blue hose
should be about 2 inches long. 2.5" is shown here.

The price of the slide throttle kit is $175 cash plus $15 cash
for shipping. Cheaper than most throttle bodies the needed
size.

Send cash only to:
833 Santa Maria St.
Suite 303
Santa Paula CA
93060

Mazda would have a great open wheel racing series with 300 HP
P-port RX8 engines like this  :)

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.