Paul,

Do you have a dyno chart from your P-Port Renesis test? If so I would
like to get a copy. Just about got the RV10 back together after several
major changes. Moving the aluminum Barry Mount spacers to the top of the
S-Beam almost corrected my thrust line problem. I was also able to
remove most of the spacers from the rear beam. Still a little angle on
the right side that may require some machine work. It will be
interesting to see if it fly's differently.

Thanks,

Bobby J Hughes

This an approximate  dyno curve. Dave Lemon said there was some kind of dyno error so it
could be as much as 10 HP optimistic. We used a Weber but you will get equal or
slightly better results with EFI. There is also some video of the test on Youtube.

http://www.youtube.com/watch?v=KQL45DYgIFw

We have 33,000 hits on this video :)

This is the actual engine and I will eventually test it again
on my prop dyno with EFI.


Paul Lamar