Subject: "P" port sealing plates
From: Rotary Engine
Date: 9/22/2009, 10:13 AM
To: AAA Put this in the To box


 Kelly Troyer wrote:
 Paul,
   I would like to buy 2 of your "P" port sealing plates............Please
 let me
 know how much and where to send payment.............

 Thanks,
 --
 Kelly Troyer
 "Dyke Delta"_13B ROTARY Engine
 "RWS"_RD1C/EC2/EM2
 "Mistral"_Backplate/Oil Manifold


 Sure no problem. Every body pays cash. No checks or credit cards.
 Ten dollars each. Plus $5 US PO flate rate box.
 send to:

 Suite 303
 830 East Santa Maria St.
 Santa Paula CA
 93060

 We should have some contoured SS tubes any day now to go along with
 that.

 We also have a whole bunch of other bits and pieces for slide throttle
 p-ports.

 Paul Lamar


Paul,
Has anyone pressure tested the sealing plates?  If so, what would be an
adequate pressure to test them.  I'm figuring 45 psi which is 3 X my normal
operating pressure.

Mark S.

I was going to suggest 50 psi.

Paul Lamar


Sounds good to me.

Mark

The beauty of these sealing plates is they are easily repairable if you do
have a leak.

If you are talented with a Dremal tool it is possible to put a large O-ring
in there :)

Paul Lamar


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.