Larry did a great job. Saves a lot tedious labor contouring the tube to fit
the inner steel rotor housing liner wear surface. To be welded in.
$20 cash each plus $5 shipping.
SS tube is expensive.
830 East Santa Maria St.
Suite #303
Santa Paula CA
93060
Craig, I am shipping your slide throttle kit today.
Paul Lamar
Paul--
Now that you have the SS P-port tubes in, can they be purchased from
you AND, additionally, installed in conjunction along WITH the P-porting
procedure at the address you listed earlier:
Paul Lamar C/O
Light Speed Engineering
416 E. Santa Maria Street,
Hangar #15, Santa Paula, CA 93060
Thanks!
Paul Vermillion
Correct Paul. There is always somebody there to receive stuff as I am in
and out of the hanger all the time.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.
F-A-N-T-A-S-T-I-C!!!!
Some follow-up questions, then. If memory serves me reasonably correct
(I've been known to have an occasional "Senior Moment" or two) the charge
for P-porting each rotor was somewhere around $150. What is the additional
labor charge for installing each of your new SS P-port tubes? (+, of course,
the $20 cost per each SS PP tube itself). Also, besides mailing payment for
each SS PP tube ($20 cash) to you at your 830 E.S.M. address, in what form
do we send money for the PP rotor labor? Likewise, is this labor charge
mailed to you at your 830 or your 416 E.S.M address? And what about
arrangements/costs for the return of the completed work to us? I'll be
sending two rotors from a '91 TB 13B.
Many Thanks again--your developmental work on the rotary engine has been a
Godsend to all of us out here in "rotary land"!
Paul Vermillion
Cash only Paul. Send it registered mail if you wish but cash
only. I don't want the time and the over head of any other way
of paying. That is a cost of doing biz whenever you buy any product
and it is added to the price or the biz person WILL.... neigh MUST add it
to the price or he/she will go broke. I don't need the time sink or
the aggravation.
This is not a money making scheme for me. I do it to promote the
goal of the rotary engine in aircraft. It gives me something significant
to do as I don't want to play golf or fish in my retirement years :)
I already retired once at a young age and bought a sail boat, singled
handed it down to La Paz and Mazatlan Mexico to go cruising. The senorita's
were nice. It is not as much fun as it is cracked up to be. I came back,
sold the boat and went back into biz :)
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.