Paul

I have the template machined and will send tomorrow..............looks
very good... the dowel pin holes are tight... they were reamed for
precision so could not be more than .002 off or it would not go
on............

Jarrett is sending me an updated file with this new and exact hole
placement.  When I hear back from you,all is good ,I can get those
plates out.....
jeff

OK Jeff. I'll take it down to Mazdatrix and try it out on a couple of
their RX8 engines. I have plenty of 13B around here.


Paul Lamar

Who.. what... um..  what am I sending.. I must have missed something.. let me
know what it is.. and I'll send away :)

Jarrett

I don't know. Jeff do you need some SW files?
BTW Jeff what cad cam software are you using.
Larry is using visa cam and he says splines are not a
problem. My local shop is using master cam I think.
No problems with splines.


Paul Lamar