Subject: Slide throttle kit cost of housings
From: Rotary Engine
Date: 10/4/2009, 4:20 PM
To: AAA Put this in the To box

 I got the kit today, Paul. Looks great. Get 'em while ya can people!

 C. Smith


 Paul, just saw that these are available. I haven't been following so
please
 tell me what is required. Do I need to send in housings to PP for the
slide
 throttle kit?
 Sven

 You can do the housings yourself or have us do them.

 The two are separate.

 Read the web site on doing the housings.
 http://www.rotaryeng.net/intake.html

 If we do them we bore your housings and weld in the SS tubes.
 You finish the inside with a die grinder or dremal tool and
 seal the water jacket with sealing plates which we bore
 when we do the housings.

 Boring the housings, welding and fitting the sealing plates
 is $150 each.

 Paul Lamar
 -

    
           Paul,

I mailed the money for a slide kit and two 2" dia. tubes to you today.

I haven't started to tear down my 13B yet.   How much time do I have to get
the housings to you?

Gene Sandburg
        
We can wait about a week or two.
I am in  Seattle at an internet cafe so email will be sporadic for a few
days._

Paul Lamar


Paul, I was pricing .032 teflon, and found this source
http://www.scicominc.com/teflon_sheet_stock.htm.
I don't know what the "etching" process is, do we need the etched or will
the standard sheet material do?
C. Smith

So far I don't think we need the etch but treat it as insurance..
How much are they asking?

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.