Subject: Fuel System
From: Rotary Engine
Date: 10/7/2009, 6:26 AM
To: AAA Put this in the To box


Hi Paul  and all

We are trying to make a decision re: fuel system.
I've  attached a PDF with design and questions etc.
Could you please pull it to  pieces, make recommendations?


Thanks

Steve Izett
Perth  Western Australia
Building Glasair SIIRG Renesis 4 Port RD1C EC2  EM3



I don't think you want to return the flow from the sump  tank back to
the main tank as the Facet will keep circulating fuel. I think  you want
to seal the sump tank and allow the Facet to make up what is used  by the
engine. Hopefully Perry Mick will chime in as he runs a similar  system.

How large is the sump tank?

Paul  Lamar


Steve,

While facet pumps are very reliable, if your  facet pump fails, you're
immediately down to 8 gallons of fuel, maybe less  once you realize it has
failed.  Just a thought...

Mark  S.
Lancair ES


duplicate your pumps ----small cost in weight and $.

Rich


Hi paul

The sump tank is  8 Gal and is 24' or so above the wing tank.

Steve Izett

That is big enough so hot return  should not cause a problem.

Paul Lamar

-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.