Subject: uController Era -- WAS: Re: 555 fuel injection
From: Rotary Engine
Date: 10/7/2009, 6:24 AM
To: AAA Put this in the To box


 <snip
 I'll assume for the moment that the MAF output is the square root of
 the
 flow.

 This might sound strange but perhaps the best way to make a MAF linear
 is use an 14 pin 16F684 pic chip to PWM drive a injector switching
 FET and do away with the 555. The program could be just be a look up
 table loop setting the PWM. The price in quantity is under a 3 bucks.

 http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010214


 Another possibility is use a manifold pressure sensor that has a 0
 to 5 V linear out put to control a 555 instead of a MAF. We have a
 lot of experience with those as that is what Tracy uses to feed his
 computer.


 Paul Lamar

HOLY COW PAUL!  *NOW* you're going to a microcontroller!?!

Does this signal the end of the MAF/555 experiment?

IMHO - YES YES YES!!!

1) use a microcontroller to A/D the MAF voltage
2) use a lookup table to determine duty cycle
3) alter pulse width with the INVERSE of RPM (divide by RPM)
4) Inject-Per-Revolution (IPR) the resulting pulse width
5) go to sleep until next injection trigger

Damn that was easy.  Right?

If you want a Speed/Density (MAP sensor) system, there are a few more
steps, but still "simple".  Start with MegaSquirt FAQs to avoid
reinventing the wheel.  They have done A LOT of the hard work and have
proven systems out there.

*****

Since you keep plugging PIC chips, I'll return the favor by plugging
TI chips (I have no relationship with TI).  The Texas Instrument
MSP430 chips cost under $1 in quantity.  BUT ... you can get a
COMPLETE dev kit for $20 - try and beat THAT for getting started!
http://focus.ti.com/docs/toolsw/folders/print/ez430-f2013.html
In fact, I think the MSP430 chips beat all others point-by-point,
across the board.  CERTAINLY worth consideration for new projects with
no historical design baggage.

I know you don't want to learn a new instruction set and
microcontroller family (reasonable), but the TI MSP430's are really,
REALLY nice low-power high-performance RISC chips that are very
elegantly laid out - from the instruction set and registers to the
onboard peripherals.  It's a real pleasure to work with these as
opposed to the Intel and Motorola microcontrollers.  The best day in
my recent EE life was when an engineer friend twisted my arm into
buying the $20 USB dev kit.  I haven't looked back since.

I recommend these for anyone starting out and learning to play with
micro/embedded projects.  After all, $20 isn't much to risk when
learning something brand new.  (Contact me offline if interested:
vince at pacstates dot com - I'll pay it forward and twist YOUR arm.)

-Vince Orton

Weird Yes? The straw that broke the camels back was the non linear nature of the MAF. I can program the chips as I already have a Motorola /Freescale programmer and the experience to do it. I'll sell them for less $5 plus shipping.

You will need four as I would still do the 555 modular concept of one controller per injector.

Or you can do it Vince if you wish at whatever you feel like charging.

Does the TI chip have A to D and PWM out?

Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.