<snip
I'll assume for the moment that the MAF output is the square root of
the
flow.
This might sound strange but perhaps the best way to make a MAF linear
is use an 14 pin 16F684 pic chip to PWM drive a injector switching
FET and do away with the 555. The program could be just be a look up
table loop setting the PWM. The price in quantity is under a 3 bucks.
http://www.microchip.com/wwwproducts/Devices.aspx?dDocName=en010214
Another possibility is use a manifold pressure sensor that has a 0
to 5 V linear out put to control a 555 instead of a MAF. We have a
lot of experience with those as that is what Tracy uses to feed his
computer.
Paul Lamar
HOLY COW PAUL!
*NOW* you're going to a microcontroller!?!
Does this signal the end of the MAF/555 experiment?
IMHO - YES YES YES!!!
1) use a microcontroller to A/D the MAF voltage
2) use a lookup table to determine duty cycle
3) alter pulse width with the INVERSE of RPM (divide by RPM)
4) Inject-Per-Revolution (IPR) the resulting pulse width
5) go to sleep until next injection trigger
Damn that was easy. Right?
If you want a Speed/Density (MAP sensor) system, there are a few more
steps, but still "simple". Start with MegaSquirt FAQs to avoid
reinventing the wheel. They have done A LOT of the hard work and have
proven systems out there.
*****
Since you keep plugging PIC chips, I'll return the favor by plugging
TI chips (I have no relationship with TI). The Texas Instrument
MSP430 chips cost under $1 in quantity. BUT ... you can get a
COMPLETE dev kit for $20 - try and beat THAT for getting started!
http://focus.ti.com/docs/toolsw/folders/print/ez430-f2013.html
In fact, I think the MSP430 chips beat all others point-by-point,
across the board. CERTAINLY worth consideration for new projects with
no historical design baggage.
I know you don't want to learn a new instruction set and
microcontroller family (reasonable), but the TI MSP430's are really,
REALLY nice low-power high-performance RISC chips that are very
elegantly laid out - from the instruction set and registers to the
onboard peripherals. It's a real pleasure to work with these as
opposed to the Intel and Motorola microcontrollers. The best day in
my recent EE life was when an engineer friend twisted my arm into
buying the $20 USB dev kit. I haven't looked back since.
I recommend these for anyone starting out and learning to play with
micro/embedded projects. After all, $20 isn't much to risk when
learning something brand new. (Contact me offline if interested:
vince at pacstates dot com - I'll pay it forward and twist YOUR arm.)
-Vince Orton
Weird Yes? The straw that broke the camels back was the non linear
nature of the MAF. I can program the chips as I already have a Motorola
/Freescale programmer and the experience to do it. I'll sell them for
less $5 plus shipping.
You will need four as I would still do the 555 modular concept of one
controller per injector.
Or you can do it Vince if you wish at whatever you feel like charging.
Does the TI chip have A to D and PWM out?
Paul Lamar
Doesn't that USB iDAQ have a PWM output capability? I would think that
thing has everything you need right there. Just need to make your own
program for it.
Sad to see the 555 sytem dropped so suddenly.
C. Smith
Yes I think that might work. I see programming it as a problem.
It has an immediate application, as is, to record the fuel map as a
function of engine RPM and intake manifold pressure. I need to get mine
back from Mark Suspinski. Hint :)
BTW if you are having trouble tuning Tracy's system this device would be
handy to determine what the fuel map is at any RPM and intake manifold
pressure level.
Back to the 555.
Think of the microchip as a sophisticated 14 pin $5 555.
We will call it the "Five dollar 555 system" :)
It does the same thing as a 555 with about the same number, more or
less, resistors and capacitors. Instead of responding to an ideal liner
voltage with air flow function it responds to the square root of the
voltage out of the actual MAF with a linear increase in pulse width.
We will need a new PC board design but everything else about the 555
system will be the same.
If we find that the engines run consistently rich or lean in some
RPM/power range we can adjust the chip and swap it out if it is plugged
into a socket. No big deal. $20 bucks for a new set of chips. In fact
since they are flash memory we might be able to merely re-flash them.
It only takes a few minutes re-flash them. You can also store an
infinite number of maps on your hard disk for use or re-use and people
can share maps. I can save them and offer ready to go maps burned on the
chips. Or Vince can do it all.
Paul Lamar
Paul, I can send you mine if you need one right away, not using it, and
have another from the other company with 20V input range.
C. Smith
Well it won't hurt. I'll find a use for it. Thanks.
Paul Lamar
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.