I don't suppose we have any Motorola 6800 assembly language programmers
on here or do we?
Well, it's been a while, but I've done it. :)
Bob W.


Several people have responded.

Bob White, Matt Prather, Rick and Cary.

I'll establish a consensus.

I need some one to read this pdf and set the port direction registers
up for one A to D in and a PWM out. Also the real time clock should be set to  8 ms.  Not a trivial task. These chips are getting complicated because they are  putting in a lot of options. Please comment as much as possible.

MC9RS08KA8RM.pdf

I'll attach the pdf. Sorry people it is rather large.
--
I usually limit attachments to one meg or less. I'll only send this
out only  once.
You can get more help from here but you will have to sign up and log in.


https://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RS08KA">http://www.microsquirt.info/


Paul Lamar



I use to teach 6800 programming for years to engineers for Motorola.
What do yo need?

ej neil


We just need the I/O registers configured as per above.
Send well commented ASM source code.

Paul Lamar