I don't suppose we have any Motorola 6800 assembly language programmers
on here or do we?
Well, it's been a while, but I've done it. :)
Bob W.
--
N93BD - Rotary Powered BD-4 - http://www.bob-white.com
3.8 Hours Total Time and holding
Cables for your rotary installation - http://roblinstores.com/
Several people have responded.
Bob White, Matt Prather, Rick  and Cary.
I'll establish a consensus.
I need some one to read this pdf and set the port direction registers
up for
one A to D in and a PWM out. Also the real time clock should be set to
8 ms.
Not a trivial task. These chips are getting complicated because they are
putting in a lot of options. Please comment as much as possible.
 MC9RS08KA8RM.pdf
I'll attach the pdf. Sorry people it is rather large.
--
I usually limit attachments to one meg or less. I'll only send this
out only
once.
You can get more help from here but you will have to sign up and log in.


https://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=RS08KA&nodeId=01624684499487
This will go a long way to help as it is time consuming. I can handle the
actual program. I am going to count the real time 8 ms interrupts and
squirt
fuel on every other one.  I am aware they overlap intake cycles at
high RPM.
Thanks
Paul Lamar


It's probably going to be the weekend before I can take a look..
 Matt-
OK..  I couldn't help it - I had to take a look at the doc.  Seems
like a cool chip and a pretty easy to follow doc.  I'd think we can
come up with something that will work.
Matt-

Great Matt.

Paul Lamar


Before anyone gets too far into the 6800 code, don't over look the Megasquirt  series of boxes.  Lot of time, lots of thought, so with the 5th (???) Generation the boxes are pretty decent.

http://www.microsquirt.info/

Caveat, for Aircraft there is no built in "limp home" mode in the box (at least  last time I looked).  Nor is there secondary box.Only commercially supported box with redundacy built in is Tracy Crooks ECU (real world aviation).

As to writing code and hardware development these days, I just don't have the time, nor desire. That is my day job, when I get home I love to fire up the Meco torch, or Milling machine, and work with metal. Just my way of relaxing and not burning out with electronics.

Tom W

Too complicated and too hard to maintain due to the size of the program IMHO. Also over kill for aircraft use. The $5 555 program will fit on the back of an envelope :)

BTW I have a set of bare PC boards for megasquirt if some body wants them. Free. Send me a self addressed and stamped envelope and I will mail them to you.

Paul Lamar