Subject: CAS Sensors -- WAS: MAF/uC FI Controller
From: Rotary Engine
Date: 10/10/2009, 1:35 PM
To: AAA Put this in the To box

Vince,

Where are you buying small quantity of the KMI15/4 sensor?

Neither Digikey nor Mouser sell quantity one units. Looks like a
minimum quantity is around 800 pcs (T&R).

Admitted I could get samples for my Arrow FAE, but looking online at
arrow's web site, they are not stocked.

I hate designing stuff around "unobtainium" parts.   Semiconductor
sector is picking up, but our lead times are being pushed out from
12 weeks to 20 weeks due to demand (to save money everyone dropped
inventories), so as things ramp back up you'll see allocation.

One tip for aircraft/automotive is to see if they sell a -40C to
+125C (automotive) version of the part. Even it you use the -40C to
+85C Industrial version, the device has been qualified for
automotive. Makes life much easier even if not running at +125C.
Oh stopped in at a Houston based customer who is using one of -40C
to +85C rated devices, he had the part running at 180C Ambient! I
was shocked it was running.

Tom W

Tom -

Buying?  BUYING?  I'm sampling, baby.

I am trying to order SAMPLES from NXP, but they are a little more
trouble than usual.  For instance, TI is a simple matter of clicking
on a link and providing shipping info.  I received a few sample TI
MSP430 uC DIP chips I use for prototyping.  (I usually use samples
during design and testing, and actually purchase the final-design
parts.)

Your unobtainium comment is serious.  I don't like weird components
either.  If these parts are going to be 800qty lots, I think we can
just move along.

Your point on verifying temperature ranges is well taken.  I'll look
to make sure -40/+125 parts are available when selecting components.

Oh, by the way EVERYONE, if I *ever* start to go down a bad design/
test road, please PLEASE save me the trouble and SPEAK UP.  I'm never
too proud to change when someone presents a valid case.  I'd love
saving months of banging my head on the wall!

For the Flywheel CAS Sensor (#2) project, if anyone has a SIMPLE,
CHEAP component or package to recommend as an alternative to the NXP
KMI15/4 sensor, lay it on me.  If the NXP KMI15/4 is unobtainium, then
I'll probably resort to standard automotive Hall Effect or Variable
Reluctance sensors and use one of the following:
http://www.onsemi.com/PowerSolutions/product.do?id=NCV1124DG
http://www.national.com/mpf/LM/LM1815.html
http://www.maxim-ic.com/quick_view2.cfm/qv_pk/5410
(Of course I'll look at other recommendations.)

Back to the Returnless PWM Fuel Pump Controller (#1) project!  It is
stalled looking for an alternative to Ford's FRPS (Fuel Rail Pressure
Sensor), minimum $50 each new.  My design calls for two - one for each
fuel tank pump controller.  Of course everyone probably saw my help
request for locating other automotive fuel pressure sensors - SPEAK UP!

-Vince Orton

Craig suggests;
Vince, have you looked at the Freon pressure sensors used on auto AC systems?  Seems they would have all metal interfaces with the medium under pressure.  Freon originally and gasoline/alcohol for your needs.  Just a thought.
You might need to work in the bottom 10-20% of their operating range, but that might not be a problem.

Craig Taylor



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.