Subject: CAS Sensors -- WAS: MAF/uC FI Controller
From: Rotary Engine
Date: 10/10/2009, 1:37 PM
To: AAA Put this in the To box


Snip
Oh, by the way EVERYONE, if I *ever* start to go down a bad design/
test road, please PLEASE save me the trouble and SPEAK UP.  I'm never
too proud to change when someone presents a valid case.  I'd love
saving months of banging my head on the wall!
-Vince Orton


Okay, I'll chime in since you asked.  With all the time spent on 555 vs TI
vs Motorola and the boards and sensors, then we have return pumps, etc
-- I'm thinking it might be faster and easier to hand-build a carburetor
from scratch.  Even if we made it from aluminum cans melted in charcoal
forges in our backyards and poured into hand-built sand molds, it might
be less work than the FI route.

Okay, wiseacre mode off and back to lurking.

Mark Waldron


-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.