Subject: [Fwd: Rotor housings]
From: Rotary Engine
Date: 10/11/2009, 1:52 PM
To: AAA Put this in the To box


Paul,

I measured the thickness of the housings per Turrentine's video as well as Pineapple Racing online video.  The good housing was within a couple of thousanths while the bad housing was + or - 20 thousanths.

Joe


It has been definitely over heated. It is scrap.
The tolerance is only .003 as I recall. Could be less.

Good for p-port practice only :)


Paul Lamar
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.