Paul

  I think we got it...........I will make a template with these
  numbers..........cut a 13" hole for your engine.....

  Larry's geometry was right on.....


  jeff

  Great. Thanks to all that helped.

  Paul Lamar

 paul i would like if you can give me the outside dimension of the
 front plate and also with the cup
 What is the dimension from the center of the engine and the maximum
 width at exhaust and pport side

 Thank,s

 Jean Prudhomme

 I assume you are talking about the motor plate.
 Jeff has those dimensions as he did the final design.

 Paul Lamar


to all

hope this helps


jeff