Subject: CAS Sensors -- WAS: MAF/uC FI Controller
From: Rotary Engine
Date: 10/12/2009, 11:55 AM
To: AAA Put this in the To box


Craig suggests;
Vince, have you looked at the Freon pressure sensors used on auto
AC  systems?  Seems they would have all metal interfaces with the medium
under pressure.  Freon originally and gasoline/alcohol for your
needs.  Just a thought. You might need to work in the bottom 10-20%
of their operating range, but that might not be a problem.
<snip
These Stewart Warner fuel pressure sensors look interesting.
Available 15 to 150 psi full scale in 5 ranges.  They are variable
resistance with 240 ohms maximum at one end, 30 Ohms or so on the
other.

http://www.stewartwarner.com/Catalog/sdrpress.html

Craig Taylor

<snip
Look at Wika. Try the C 10. Available with 4 - 20 mA or 1 - 5 V.
These are
also calibratable and come in different ranges. They look like the
intake
pressure on the Mistral.

Dale Davies

Craig - I can look at the auto AC pressure sensors ... do you have
recommendations and/or links?  My gut feel is that working at the
extreme ranges of a sensor is a bad idea, but I'll check out whatever
you recommend.  You also recommended Stewart Warner gauge pressure
senders.  I have considered automotive gauge senders, but I am not
sure if they are "engine control" quality.  I'd welcome feedback from
knowledgeable engineers if it's appropriate to use a gauge sender
unit to control a PWM pump.  (These gauge-type sensor units vary resistance
from ~30 to ~240 ohms.)

Dale - I checked out the Wika site.  The sensors are WAY too
expensive for our purposes ($300+ if I read correctly).  It seems
that they are better suited for food industry requirements.  Any
more leads?

Everyone - Thanks for helping out!

-Vince Orton

Vince
 I realise the Wika's are expensive. We use them some on industrial
compressor drives. Cat and Waukesha natural gas engines for gas compression.
These are high vibration applications due to the loading, and the pressure
transducers are usually mounted at the engine base. They get shook once in a
while and fail. In the app you are proposing, they would last. You could use
the same model for oil pressure, fuel pressure, PSRU oil pressure. Another
of the same with a different range could monitor manifold pressure and
coolant pressure (advance coolant loss warning). This reduces parts
inventory. I know individual builders are not too worried about parts, but
having a spare around is a good plan. The on time delivery and over night
has proven to fall apart now and then:-)). Another advantage is the fact
they are calibratable to the span you need and can be tweeked when they
drift. Automotive parts will generally not have the same accuracy and when
they do the cost also rises. Like the old Fram ad  "Pay me now or pay me
later".  Just a bit to ponder. There is another supplier of transducers that
look the same, but I can not think of their name right now. What are the
Mistral manifold pressure sensors? They may also come in different ranges.

Dale Davies
-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.