Craig suggests;
Vince, have you looked at the Freon pressure sensors used on auto AC
systems? Seems they would have all metal interfaces with the medium
under pressure. Freon originally and gasoline/alcohol for your
needs. Just a thought. You might need to work in the bottom 10-20%
of their operating range, but that might not be a problem.
<snip
These Stewart Warner fuel pressure sensors look interesting.
Available 15 to 150 psi full scale in 5 ranges. They are variable
resistance with 240 ohms maximum at one end, 30 Ohms or so on the
other.
http://www.stewartwarner.com/Catalog/sdrpress.html
Craig Taylor
<snip
Look at Wika. Try the C 10. Available with 4 - 20 mA or 1 - 5 V.
These are
also calibratable and come in different ranges. They look like the
intake
pressure on the Mistral.
Dale Davies
Craig - I can look at the auto AC pressure sensors ... do you have
recommendations and/or links? My gut feel is that working at the
extreme ranges of a sensor is a bad idea, but I'll check out whatever
you recommend. You also recommended Stewart Warner gauge pressure
senders. I have considered automotive gauge senders, but I am not
sure if they are "engine control" quality. I'd welcome feedback from
knowledgeable engineers if it's appropriate to use a gauge sender unit
to control a PWM pump. (These gauge-type sensor units vary resistance
from ~30 to ~240 ohms.)
Dale - I checked out the Wika site. The sensors are WAY too expensive
for our purposes ($300+ if I read correctly). It seems that they are
better suited for food industry requirements. Any more leads?
Everyone - Thanks for helping out!
-Vince Orton
--
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site.
http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.