Matt, this is what the initial files look like
when a junk1 project is started. The board is up and running and
LED are blinking :)

--------------------------------------------------------

This demo is pretty close to what we are looking for. About two pages.
Not much.

The Code Warrior  IDE is rather tricky as all projects are named
"name.asm"
everything must go in a separate folder.

Here too is a short video of what the board is doing in the default
demo.

Paul Lamar

<snip


OK Paul.  That looks pretty familiar..  I'll see what I can put together.


Matt-

I am still trying to figure out this IDE. It is all Czech to me:)

Paul Lamar


  There are some sourceforge.org IDE's and sim/emulators for 6800 family
  chipsets - although I have not used them so I don't know useful they are.
  Cary


OK..  I found the included files - things like tasc0 and adr are
defined there.  Kinda fills in some blanks between the device doc and
the code example..


Matt-

Here is the IDE getting started instructions in C.
I hope it is pretty much the same for asm.


-----------------------------------------------------------

Matt, any luck? Would a demo board and Code Warrior help?

Paul Lamar