Subject: More RPM more power
From: Rotary Engine
Date: 10/19/2009, 3:31 PM
To: AAA Put this in the To box

It just occurred to me how to increase the RPM and power of the rotary.
Currently the RPM limiting factor is the rotor bearing.

Way back in the 1930's Allison built a PSRU with a 14" diameter
engine oil pressure fed 2.5 inch wide plain journal bearing.
That led to problems Allison addressed by increasing the oil
supply. See the attached "plain-journal-bear-ratio.jpg"

Therefore what is needed IMHO is a larger oil pump for rotary racing engines
running over 11,000 RPM.

The Wankel SuperTech engine in Germany will really suffer from this effect.

The 16B may suffer from this effect as well.

Paul Lamar

"Vee's For Victory" book:

"Wright Field had similar concerns about the even larger 14 inch diameter
plain bearing for the 2: 1 reduction gear. It had a rotative speed which
would go as high as 1820 rpm in dives (6,670 feet per minute sliding
velocity), and being of such short axial length (2-1/2 inches) that it
seemed impossible to adequately lubricate without supplying a relatively
large quantity of oil, most of which would flow unused from the ends of the
bearing. Indeed such must have been the case, for it was stated by Allison
that the oil flow to this bearing was five gallons per minute, and it was
found by test that the total flow through the entire engine did not exceed
fifteen gallons per minute.!!"

---------------------------------------------------------------------------

Here is a good shot of the  SuperTech narrow rotor bearing.

The Wankel rotary is an amazing device. You start messing with the geometry
ratios and all sort of anticipated things happen. IMHO it would be better to make
the RX8 engine rotor and rotor housings wider to increase the displacement
instead of narrower like the 16B.

IMHO The combustion eff. may be improved with a true multi-strike ignition.

Paul Lamar



-- 
The Rotary Engine NewsLetter. Powered by Linux.
ACRE NL web site. http://www.rotaryeng.net
Youtube key word UTUBPLEASE
Copyright 1998-2009 All world wide rights reserved.